Zeitschriftenbeiträge | Konferenzbeiträge | Bücher und Buchbeiträge
@Article{Marko2022,
author = {Marko, Lukas and Saxinger, Martin and Steinboeck, Andreas and Kugi, Andreas},
title = {Cancellation of unknown multi-harmonic disturbances in multivariable flexible mechanical structures},
doi = {10.1016/j.automatica.2021.110123},
pages = {110123},
volume = {137},
journal = {Automatica},
year = {2022},
}
@Article{Stadler2022,
author = {Stadler, G. and Steinboeck, A. and Marko, L. and Deutschmann-Olek, A. and Kugi, A.},
title = {Iterative learning and feedback control for the curvature and contact force of a metal strip on a roll},
doi = {10.1016/j.conengprac.2022.105071},
pages = {105071},
volume = {121},
journal = {Control Engineering Practice},
year = {2022},
}
@Article{Pietschnig2022,
author = {C. Pietschnig and A. Steinboeck and A. Kugi},
title = {Are edger rolls useful to control the plate motion and camber in a reversing rolling mill?},
doi = {10.1016/j.jprocont.2022.04.007},
issn = {0959-1524},
pages = {71--81},
volume = {114},
journal = {Journal of Process Control},
year = {2022},
}
@Article{knechtelsdorfer2021,
author = {U. Knechtelsdorfer and M. Saxinger and M. Schwegel and A. Steinboeck and A. Kugi},
title = {A two-stage observer for the compensation of actuator-induced disturbances in tool-force sensors},
doi = {10.1016/j.ymssp.2020.106989},
issn = {0888-3270},
pages = {106989 1--12},
url = {http://www.sciencedirect.com/science/article/pii/S0888327020303757},
volume = {146},
journal = {Mechanical Systems and Signal Processing},
keywords = {Sensor response correction, Model based disturbance observer, Tool force sensor, Reduced Luenberger observer, Model adaption, Measurement results},
year = {2021},
}
@Article{Mennemann2021,
author = {Mennemann, J.-F. and Marko, L. and Schmidt, J. and Kemmetm{\"u}ller, W. and Kugi, A.},
title = {{Nonlinear Model Predictive Control of a Variable-Speed Pumped-Storage Power Plant}},
doi = {10.1109/TCST.2019.2956910},
issn = {1063-6536},
number = {2},
pages = {645--660},
volume = {29},
journal = {IEEE Transactions on Control Systems Technology},
year = {2021},
}
@Article{knechtelsdorfer2021a,
author = {U. Knechtelsdorfer and A. Steinboeck and F. Schausberger and A. Kugi},
title = {A novel mass flow controller for tandem hot rolling mills},
doi = {10.1016/j.jprocont.2021.07.002},
issn = {0959-152},
pages = {168--177},
volume = {104},
journal = {Journal of ProcessControl},
year = {2021},
}
@Article{Marko2020,
author = {Marko, Lukas and Saxinger, Martin and Steinboeck, Andreas and Kugi, Andreas},
title = {Magnetic Actuator Design for Strip Stabilizers in Hot-Dip Galvanizing Lines: Examining Rules and Basic Tradeoffs},
doi = {10.1109/MIAS.2019.2943662},
issn = {1558-0598},
number = {2},
pages = {54--63},
volume = {26},
journal = {IEEE Industry Applications Magazine},
year = {2020},
}
@Article{Roux2020,
author = {le Roux, J.D. and Steinboeck, A. and Kugi, A. and Craig, I.K.},
title = {Steady-state and dynamic simulation of a grinding mill using grind curves},
doi = {10.1016/j.mineng.2020.106208},
pages = {106208 1--11},
volume = {152},
journal = {Minerals Engineering},
year = {2020},
}
@Article{Saxinger2020,
author = {Saxinger, M. and Marko, L. and Steinboeck, A. and Kugi, A.},
title = {Feedforward control of the transverse strip profile in hot-dip galvanizing lines},
doi = {10.1016/j.jprocont.2020.05.007},
issn = {0959-1524},
pages = {35 - 49},
volume = {92},
journal = {Journal of Process Control},
year = {2020},
}
@Article{Marko2020a,
author = {Marko, Lukas and Saxinger, Martin and Kemmetm\"uller, Wolfgang and Steinboeck, Andreas and Kugi, Andreas},
title = {Frequency-adaptive cancellation of harmonic disturbances at non-measurable positions of steel strips},
doi = {10.1016/j.mechatronics.2020.102423},
pages = {102423},
volume = {71},
journal = {Mechatronics},
year = {2020},
}
@Article{Mueller2019,
author = {M\"uller, Martin and Steinboeck, Andreas and Prinz, Katharina and Ettl, Andreas and Kugi, Andreas and Etzelsdorfer, Kurt and Fuchshumer, Stefan and Seyrkammer, Hannes},
title = {Asymmetric hydrodynamic roll gap model and its experimental validation},
doi = {10.1007/s00170-018-2634-1},
issn = {1433-3015},
number = {9-12},
pages = {3101-–3111},
volume = {100},
journal = {International Journal of Advanced Manufacturing Technology},
year = {2019},
}
@Article{Steinboeck2019,
author = {Steinboeck, Andreas and Saxinger, Martin and Kugi, Andreas},
title = {Hamilton’s Principle for Material and Nonmaterial Control Volumes Using Lagrangian and Eulerian Description of Motion},
doi = {10.1115/1.4042434},
issn = {0003-6900},
number = {1},
pages = {010802-1--010802-14},
volume = {71},
journal = {Applied Mechanics Reviews},
year = {2019},
}
@Article{Prinz2019,
author = {Prinz, Katharina and Steinboeck, Andreas and M\"uller, Martin and Ettl, Andreas and Schausberger, Florian and Kugi, Andreas},
title = {Online Parameter Estimation for Adaptive Feedforward Control of the Strip Thickness in a Hot Strip Rolling Mill},
doi = {10.1115/1.4043575},
issn = {0022-0817},
number = {7},
pages = {071005-1--071005-12},
volume = {141},
journal = {Journal of Manufacturing Science and Engineering},
year = {2019},
}
@Article{Stadler2019,
author = {Stadler, G. and Steinboeck, A. and Baumgart, M. and Ettl, A. and Kugi, A.},
title = {Model-based estimation of the stress-strain curve of metal strips},
doi = {10.1080/13873954.2019.1604553},
number = {3},
pages = {224--241},
volume = {25},
journal = {Mathematical and Computer Modelling of Dynamical Systems},
year = {2019},
}
@Article{Pietschnig2019a,
author = {Pietschnig, C. and Marko, L. and Kemmetm{\"u}ller, W. and Kugi, A.},
title = {{Optimal feedforward control of hydraulic drive systems with long pipelines}},
doi = {10.1002/pamm.201900195},
pages = {1--2},
volume = {19},
journal = {PAMM, Proceedings in Applied Mathematics and Mechanics},
year = {2019},
}
@Article{Mennemann2018,
author = {Mennemann, J.-F. and Marko, L. and Schmidt, J. and Kemmetm{\"u}ller, W. and Kugi, A.},
title = {{The spectral element method as an efficient tool for transient simulations of hydraulic systems}},
doi = {10.1016/j.apm.2017.10.010},
issn = {0307-904X},
pages = {627--647},
volume = {54},
journal = {Applied Mathematical Modelling},
year = {2018},
}
@Article{Prinz2018,
author = {Prinz, Katharina and Steinboeck, Andreas and Kugi, Andreas},
title = {Optimization-based feedforward control of the strip thickness profile in hot strip rolling},
doi = {10.1016/j.jprocont.2018.02.001},
issn = {0959-1524},
pages = {100--111},
volume = {64},
journal = {Journal of Process Control},
year = {2018},
}
@Article{Marko2018,
author = {Marko, L. and Mennemann, J.-F. and Jadachowski, L. and Kemmetm{\"u}ller, W. and Kugi, A.},
title = {{Early- and late-lumping observer designs for long hydraulic pipelines: Application to pumped-storage power plants}},
doi = {10.1002/rnc.4049},
issn = {1099-1239},
number = {7},
pages = {2759--2779},
volume = {28},
journal = {Int. Journal of Robust and Nonlinear Control},
year = {2018},
}
@Article{Jadachowski2018,
author = {Jadachowski, L. and Steinboeck, A. and Kugi, A.},
title = {State estimation and advanced control of the 2D temperature field in an experimental oscillating annealing device},
doi = {10.1016/j.conengprac.2018.06.011},
issn = {0967-0661},
pages = {116--128},
volume = {78},
journal = {Control Engineering Practice},
year = {2018},
}
@Article{Saxinger2018,
author = {Saxinger, M. and Marko, L. and Steinboeck, A. and Kugi, A.},
title = {Active rejection control for unknown harmonic disturbances of the transverse deflection of steel strips with control input, system output, sensor output, and disturbance input at different positions},
doi = {10.1016/j.mechatronics.2018.10.008},
issn = {0957-4158},
pages = {73 - 86},
volume = {56},
journal = {Mechatronics},
year = {2018},
}
@Article{Baumgart2017,
author = {Baumgart, Michael and Steinboeck, Andreas and Saxinger, Martin and Kugi, Andreas},
title = {Elasto-plastic bending of steel strip in a hot-dip galvanizing line},
doi = {10.1007/s00707-017-1824-5},
issn = {0001-5970},
number = {7},
pages = {2455--2470},
volume = {228},
journal = {Acta Mechanica},
year = {2017},
}
@Article{Jadachowski17,
author = {Jadachowski, Lukasz and Steinboeck, A. and Kugi, A.},
title = {Two-dimensional thermal modelling with specular reflections in an experimental annealing furnace},
doi = {10.1080/13873954.2016.1237969},
issn = {1387-3954},
number = {1},
pages = {23--39},
volume = {23},
journal = {Mathematical and Computer Modelling of Dynamic Systems},
year = {2017},
}
@Article{Prinz17,
author = {Prinz, K. and Steinboeck, A. and M\"uller, M. and Ettl, A. and Kugi, A.},
title = {Automatic gauge control under laterally asymmetric rolling conditions combined with feedforward},
doi = {10.1109/TIA.2017.2660458},
issn = {0093-9994},
number = {3},
pages = {2560--2568},
volume = {53},
journal = {IEEE Transactions on Industry Applications},
publisher = {IEEE},
year = {2017},
}
@Article{Roetzer17,
author = {R{\"o}tzer, Florian and Jadachowski, L. and Kugi, A.},
title = {Modellordnungsreduktion, Beobachterentwurf und Sensorplatzierung f{\"u}r einen Infrarot-Gl{\"u}hofen},
doi = {10.1515/auto-2016-0119},
issn = {2196-677X},
number = {5},
pages = {337--349},
volume = {65},
journal = {at -- Automatisierungstechnik},
year = {2017},
}
@Article{leroux:17a,
author = {J.D. le Roux and A. Steinboeck and A. Kugi and I.K. Craig},
title = {An {EKF} observer to estimate semi-autogenous grinding mill hold-ups},
doi = {10.1016/j.jprocont.2016.12.006},
issn = {0959-1524},
pages = {27--41},
volume = {51},
journal = {Journal of Process Control},
year = {2017},
}
@Article{Saxinger17,
author = {Saxinger, M. and Steinboeck, A. and Marko, Lukas and Baumgart, M. and Kugi, Andreas},
title = {Nichtlineares Bewegungsmodell f{\"u}r ein Stahlband in einer Oberfl{\"a}chenbeschichtungsanlage},
doi = {10.1515/auto-2017-0024},
issn = {2196-677X},
number = {8},
pages = {546--560},
volume = {65},
journal = {at -- Automatisierungstechnik},
year = {2017},
}
@Article{Steinboeck17,
author = {Steinboeck, Andreas and Ettl, Andreas and Kugi, Andreas},
title = {Dynamical Models of the Camber and the Lateral Position in Flat Rolling},
doi = {10.1115/1.4037177},
issn = {0003-6900},
number = {4},
pages = {040801-1--040801-14},
volume = {69},
journal = {Applied Mechanics Reviews},
year = {2017},
}
@Article{Strommer17,
author = {Strommer, S. and Niederer, M. and Steinboeck, A. and Jadachowski, L. and Kugi, A.},
title = {Nonlinear Observer for Temperatures and Emissivities in a Strip Annealing Furnace},
doi = {10.1109/TIA.2017.2669327},
issn = {0093-9994},
number = {3},
pages = {2578--2586},
volume = {53},
journal = {IEEE Transactions on Industry Applications},
publisher = {IEEE},
year = {2017},
}
@Article{Deutschmann16b,
author = {Deutschmann, Andreas and Jadachowski, Lukasz and Kugi, A.},
title = {Backstepping-based boundary observer for a class of time-varying linear hyperbolic {PIDEs}},
doi = {10.1016/j.automatica.2016.02.007},
issn = {0005-1098},
pages = {369--377},
volume = {68},
journal = {Automatica},
year = {2016},
}
@Article{Jadachowski14a,
author = {Jadachowski, L. and Meurer, T. and Kugi, A.},
title = {{Backstepping Observers for linear PDEs on Higher-Dimensional Spatial Domains}},
doi = {10.1016/j.automatica.2014.10.108},
pages = {85--97},
volume = {51},
journal = {Automatica},
year = {2015},
}
@Article{Stadler15,
author = {Stadler, G. and Steinboeck, A. and Baumgart, M. and Kugi, A.},
title = {Modellierung des Umschlingungswinkels eines auf Rollen gef\"uhrten Metallbandes},
doi = {10.1515/auto-2015-0043},
number = {8},
pages = {646--655},
volume = {63},
journal = {at -- Automatisierungstechnik},
year = {2015},
}
@InProceedings{Schausberger2021,
author = {Schausberger, F. and Pietschnig, C. and Ettl, A. and Steinboeck, A. and Kugi, A.},
booktitle = {Proceedings of the 6th IFAC Workshop on Mining, Mineral and Metal Processing (MMM)},
title = {Optimization-based estimator for the lateral strip position in tandem hot rolling},
doi = {10.1016/j.ifacol.2021.10.042},
number = {11},
pages = {7-12},
volume = {54},
address = {Nancy, France},
issn = {2405-8963},
month = {9},
year = {2021},
}
@InProceedings{Knechtelsdorfer2021,
author = {Knechtelsdorfer, U. and Steinboeck, A. and Kugi, A.},
booktitle = {Proceedings of the IEEE Industry Applications Society Annual Meeting},
title = {Robust Mass Flow Control in Hot Rolling Mills},
doi = {10.1109/IAS48185.2021.9677376},
pages = {1--7},
address = {Vancouver, Canada},
month = {10},
year = {2021},
}
@InProceedings{Jadachowski2020,
author = {L. Jadachowski and F. Roetzer and A. Steinboeck and A. Kugi},
booktitle = {Proceedings of the 21st IFAC World Congress},
title = {In-Line Estimation of the Magnetization Curve of Steel Strips in a Continuous Induction Furnace},
doi = {10.1016/j.ifacol.2020.12.750},
note = {IFAC-PapersOnLine},
number = {2},
pages = {12062--12067},
volume = {53},
address = {Berlin, Germany},
issn = {2405-8963},
month = {06},
year = {2020},
}
@InProceedings{Roetzer2020,
author = {F. R\"otzer and A. Aschauer and L. Jadachowski and A. Steinboeck and A. Kugi},
booktitle = {Proceedings of the 21st IFAC World Congress},
title = {Temperature Control for Induction Heating of Thin Strips},
doi = {10.1016/j.ifacol.2020.12.722},
note = {IFAC-PapersOnLine},
number = {2},
pages = {11968--11973},
volume = {53},
address = {Berlin, Germany},
issn = {2405-8963},
month = {06},
year = {2020},
}
@InProceedings{Marko2020b,
author = {L. Marko and M. Saxinger and M. Bittner and A. Steinboeck and A. Kugi},
booktitle = {Proceedings of the 21st IFAC World Congress},
title = {Discrete-Time Repetitive Control for Multi-Harmonic Reference Trajectories with Arbitrary Frequency},
doi = {10.1016/j.ifacol.2020.12.2221},
note = {IFAC-PapersOnLine},
number = {2},
pages = {1646--1651},
volume = {53},
address = {Berlin, Germany},
issn = {2405-8963},
month = {06},
year = {2020},
}
@InProceedings{Pietschnig2020,
author = {C. Pietschnig and A. Ettl and U. Knechtelsdorfer and A. Steinboeck and A. Kugi},
booktitle = {Proceedings of the 21st IFAC World Congress},
title = {Optimal control of plate motion and camber in a reversing rolling mill},
doi = {10.1016/j.ifacol.2020.12.721},
note = {IFAC-PapersOnLine},
number = {2},
pages = {11962--11967},
volume = {53},
address = {Berlin, Germany},
issn = {2405-8963},
month = {06},
year = {2020},
}
@InProceedings{Marko2019,
author = {Marko, L. and Saxinger, M. and Steinboeck, A. and Kugi, A.},
booktitle = {Tagungsband Mechatronik},
title = {Elektromagnetische Schwingungstilgung für Stahlb\"ander mit unbekannter harmonischer St\"orung},
doi = {10.17619/UNIPB/1-773},
pages = {31--36},
address = {Paderborn, Deutschland},
month = {3},
year = {2019},
}
@InProceedings{Pietschnig2019,
author = {Pietschnig, C. and Marko, L. and Kemmetm\"uller, W. and Kugi, A.},
booktitle = {Book of Abstracts of the 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019)},
title = {Optimal feed forward control of hydraulic drive systems with long pipelines},
isbn = {978-3-903024-84-7},
pages = {521--522},
address = {Wien},
month = {2},
year = {2019},
}
@InProceedings{Knechtelsdorfer2019,
author = {Knechtelsdorfer, U. and M\"uller, M. and Steinboeck, A. and Kugi, A.},
booktitle = {Proceedings of the 18th IFAC Symposium on Control, Optimization and Automation in Mining, Mineral and Metal Processing},
title = {Slip Model Adaptation Based on Measurements of the Strip Velocity},
doi = {10.1016/j.ifacol.2019.09.161},
pages = {42--47},
address = {Stellenbosch, South Africa},
month = {8},
year = {2019},
}
@InProceedings{Saxinger2019,
author = {Saxinger, M. and Marko, L. and Steinboeck, A. and Kugi, A.},
booktitle = {Proceedings of the 8th IFAC Symposium on Mechatronic Systems MECHATRONICS 2019},
title = {Non-Collocated Position Control of Steel Strip With Electromagnetic Rejection of Unknown Multi-Harmonic Disturbances},
doi = {10.1016/j.ifacol.2019.11.713},
number = {15},
pages = {430-1},
volume = {52},
address = {Vienna, Austria},
issn = {2405-8963},
month = {9},
year = {2019},
}
@InProceedings{Marko2019a,
author = {Marko, L. and Saxinger, M. and Steinboeck, A. and Kugi, A.},
booktitle = {Tagungsband GMA-Fachausschuss 1.40 "Systemtheorie und Regelungstechnik"},
title = {Elektromagnetische Bandstabilisierung und Schwingungskompensation in kontinuierlichen Feuerverzinkungsanlagen},
isbn = {978-3-9819634-2-7},
pages = {156--169},
address = {Anif/Salzburg, Austria},
month = {9},
year = {2019},
}
@InProceedings{Ettl2018,
author = {Ettl, A. and Prinz, K. and Mueller, M. and Steinboeck, A. and Kugi, A.},
booktitle = {Proceedings of the 9th Vienna International Conference on Mathematical Modelling (MATHMOD)},
title = {Mathematical Model and Stability Analysis of the Lateral Plate Motion in a Reversing Rolling Mill Stand},
doi = {10.1016/j.ifacol.2018.03.013},
pages = {73--78},
address = {Vienna, Austria},
month = {2},
year = {2018},
}
@InProceedings{Jadachowski2018a,
author = {Jadachowski, L. and Steinboeck, A. and Kugi, A.},
booktitle = {Proceedings of the 5th IFAC Workshop on Mining, Mineral and Metal Processing (MMM)},
title = {Model Averaging and Feedforward Temperature Control in an Oscillating Annealing Furnace},
doi = {10.1016/j.ifacol.2018.09.410},
number = {21},
pages = {163--168},
volume = {51},
address = {Shanghai, China},
issn = {2405-8963},
month = {8},
year = {2018},
}
@InProceedings{Mueller2018,
author = {M\"uller, M. and Steinboeck, A. and Prinz, K. and Kugi, A.},
booktitle = {Proceedings of the 5th IFAC Workshop on Mining, Mineral and Metal Processing (MMM)},
title = {Optimal Parameter Identification for a Hydrodynamic Roll Gap Model in Hot Strip Rolling},
doi = {10.1016/j.ifacol.2018.09.417},
number = {21},
pages = {195--200},
volume = {51},
address = {Shanghai, China},
issn = {2405-8963},
month = {8},
year = {2018},
}
@InProceedings{Marko2018a,
author = {Marko, L. and Saxinger, M. and Steinboeck, A. and Kugi, A.},
booktitle = {Proceedings of the IEEE Industry Applications Society Annual Meeting},
title = {Magnetic actuator design for strip stabilizers in hot dip galvanizing lines},
pages = {1--9},
address = {Portland, USA},
month = {9},
year = {2018},
}
@InProceedings{Lobe2018,
author = {Lobe, A. and Ettl, A. and Steinnboeck, A. and Kugi, A.},
booktitle = {Proceedings of the 12th IFAC Symposium on Robot Control SYROCO},
title = {Flatness-based nonlinear control of a three-dimensional gantry crane},
doi = {10.1016/j.ifacol.2018.11.563},
pages = {331-336},
address = {Budapest, Hungary},
month = {8},
year = {2018},
}
@InProceedings{Ettl2017,
author = {Ettl, A. and Steinboeck, A. and Kugi, A.},
booktitle = {Tagungsband GMA-Fachausschuss 1.30 "Modellbildung, Identifikation und Simulation in der Automatisierungstechnik"},
title = {{Modell des Bandlaufs in einer Warmwalzstra{\ss}e}},
isbn = {978-3-9819634-0-3},
pages = {314--340},
address = {Anif/Salzburg, Austria},
month = {9},
year = {2017},
}
@InProceedings{Jadachowski17a,
author = {Jadachowski, L. and Steinboeck, A. and Kugi, A.},
booktitle = {Proceedings of the 20th IFAC World Congress},
title = {Feedforward Control of the Temperature Field in an Experimental Annealing Furnace},
doi = {10.1016/j.ifacol.2017.08.2068},
number = {1},
pages = {13790--13795},
volume = {50},
address = {Toulouse, France},
issn = {2405-8963},
month = {7},
year = {2017},
}
@InProceedings{Prinz17a,
author = {Prinz, K. and Schausberger, F. and Steinboeck, A. and Kugi, A.},
booktitle = {Proceedings of the 20th IFAC World Congress},
title = {Feedforward control of lateral asymmetries in heavy-plate hot rolling using vision-based position estimation},
doi = {10.1016/j.ifacol.2017.08.1651},
number = {1},
pages = {11307--11312},
volume = {50},
address = {Toulouse, France},
issn = {2405-8963},
month = {7},
year = {2017},
}
@InProceedings{Stadler17,
author = {Stadler, G. and Steinboeck, A. and Kugi, A.},
booktitle = {Proceedings of the 20th IFAC World Congress},
title = {Control of Curvature and Contact Force of a Metal Strip at the Strip-Roll Contact Point},
doi = {10.1016/j.ifacol.2017.08.1665},
number = {1},
pages = {11325--11330},
volume = {50},
address = {Toulouse, France},
issn = {2405-8963},
month = {7},
year = {2017},
}
@InProceedings{Deutschmann16a,
author = {Deutschmann, Andreas and Jadachowski, Lukas and Kugi, Andreas},
booktitle = {Proceedings of the 2nd IFAC Workshop on Control of Systems Governed by Partial Differential Equations (CPDE 2016)},
title = {A Numerical Implementation of an Extended Luenberger Observer for a Class of Semilinear Hyperbolic PIDEs},
doi = {10.1016/j.ifacol.2016.07.444},
number = {8},
pages = {216--221},
volume = {49},
address = {Bertinoro, Italy},
month = {6},
year = {2016},
}
@InProceedings{Jadachowski16,
author = {Jadachowski, L. and Steinboeck, A. and Kugi, A.},
booktitle = {Proceedings of the 17th IFAC Symposium on Control, Optimization and Automation in Mining, Mineral and Metal Processing (MMM)},
title = {Optimal Steady-State Temperature Field in an Experimental Annealing Furnace},
doi = {10.1016/j.ifacol.2016.10.123},
number = {20},
pages = {214--219},
volume = {49},
address = {Vienna, Austria},
issn = {2405-8963},
month = {8},
year = {2016},
}
@InProceedings{LeRoux16,
author = {Le Roux, Johan Derik and Steinboeck, A. and Kugi, A. and Craig, Ian},
booktitle = {Proceedings of the 17th IFAC Symposium on Control, Optimization and Automation in Mining, Mineral and Metal Processing (MMM)},
title = {Nonlinear Observability of Grinding Mill Conditions},
doi = {10.1016/j.ifacol.2016.10.089},
number = {20},
pages = {13--18},
volume = {49},
address = {Vienna, Austria},
issn = {2405-8963},
month = {8},
year = {2016},
}
@InProceedings{Prinz2016,
author = {Prinz, K. and Steinboeck, A. and M\"uller, M. and Ettl, A. and Kugi, A.},
booktitle = {Proceedings of the IEEE Industry Applications Society Annual Meeting},
title = {Automatic gauge control under laterally asymmetric rolling conditions combined with feedforward},
doi = {10.1109/IAS.2016.7731909},
isbn = {978-1-4799-8397-1},
pages = {1--8},
address = {Portland, USA},
month = {10},
year = {2016},
}
@InProceedings{Saxinger16,
author = {Saxinger, M. and Steinboeck, A. and Baumgart, M. and Kugi, A.},
booktitle = {Proceedings of the 17th IFAC Symposium on Control, Optimization and Automation in Mining, Mineral and Metal Processing (MMM)},
title = {Dynamical Model of Axially Moving Steel Strips},
doi = {10.1016/j.ifacol.2016.10.119},
number = {20},
pages = {190--195},
volume = {49},
address = {Vienna, Austria},
issn = {2405-8963},
month = {8},
year = {2016},
}
@InProceedings{Saxinger16a,
author = {Saxinger, M. and Steinboeck, A. and Baumgart, M. and Kugi, A.},
booktitle = {Tagungsband GMA-Fachausschuss 1.30 "Modellbildung, Identifikation und Simulation in der Automatisierungstechnik"},
title = {{Nichtlineares Bewegungsmodell f{\"u}r ein Stahlband in einer Oberfl{\"a}chenbeschichtungsanlage}},
isbn = {978-3-9815012-9-2},
pages = {46--67},
address = {Anif/Salzburg, Austria},
month = {9},
year = {2016},
}
@InProceedings{Strommer16a,
author = {Strommer, S. and Niederer, M. and Steinboeck, A. and Jadachowski, L. and Kugi, A.},
booktitle = {Proceedings of the IEEE Industry Applications Society Annual Meeting},
title = {Nonlinear observer for temperatures and emissivities in a strip annealing furnace},
doi = {10.1109/IAS.2016.7731914},
isbn = {978-1-4799-8397-1},
pages = {1--8},
address = {Portland, USA},
month = {10},
year = {2016},
}
@InProceedings{Baumgart15,
author = {Baumgart, M. and Steinboeck, A. and Saxinger, M. and Kugi, A.},
booktitle = {Proceedings of the 3rd Polish Congress of Mechanics (PCM) and 21st International Conference on Computer Methods in Mechanics (CMM)},
title = {Elasto-plastic bending of steel strip in a hot-dip galvanizing line},
pages = {55--56},
address = {Gdansk, Poland},
month = {9},
year = {2015},
}
@InProceedings{Deutschmann15,
author = {Deutschmann, Andreas and Jadachowski, Lukas and Kugi, Andreas},
booktitle = {Kolloquium zur Theorie und Praxis von Systemen mit verteilten Parametern, Saarbr{\"u}cken},
title = {{B}ackstepping-basierter {B}eobachter f{\"u}r lineare und semilineare hyperbolische {PIDE}},
note = {Vortrag: Kolloquium zur Theorie und Praxis von Systemen mit verteilten Parametern, Saarbr{\"u}cken;},
month = {3},
year = {2015},
}
@InProceedings{Jadachowski15a,
author = {Jadachowski, L.},
booktitle = {Invited lecture at Workshop on Applied Problems with Partial Differential Equations},
title = {Backstepping observers for some classes of parabolic PDEs},
address = {Vienna, Austria},
month = {12},
year = {2015},
}
@InProceedings{Jadachowski15,
author = {Jadachowski, L. and Steinboeck, A. and Kugi, A.},
booktitle = {Proceedings of the 8th Vienna International Conference on Mathematical Modelling (MATHMOD)},
title = {Heat Transfer with Specular Reflections in an Experimental Annealing Device},
doi = {10.1016/j.ifacol.2015.05.069},
pages = {494--499},
address = {Vienna, Austria},
month = {2},
year = {2015},
}
@InProceedings{Kugi15,
author = {A. Kugi},
booktitle = {Keynote Speaker for 2015 IEEE Multi-Conference on Systems and Control (MSC)},
title = {Model-based Process Control in the Steel Industry},
address = {Sydney, Australia},
month = {9},
year = {2015},
}
@InProceedings{Kugi15a,
author = {A. Kugi},
booktitle = {Invited lecture at voestalpine Synergieplattform, Industrie 4.0 / Smart Production at voestalpine},
title = {Industrie 4.0: An Automatic Control Perspective},
address = {Linz, Austria},
month = {6},
year = {2015},
}
@InProceedings{Saxinger15,
author = {Saxinger, M. and Steinboeck, A. and Baumgart, M. and Kerschbaummayr, Peter and Kugi, A.},
booktitle = {Proceedings of the 4th IFAC Workshop on Mining, Mineral and Metal Processing (MMM)},
title = {Influence of Air Cooling Jets on the Steady-State Shape of Strips in Hot Dip Galvanizing Lines},
doi = {10.1016/j.ifacol.2015.10.093},
number = {17},
pages = {143--148},
volume = {48},
address = {Oulu, Finland},
issn = {2405-8963},
month = {8},
year = {2015},
}
@InProceedings{Steinboeck15,
author = {Steinboeck, A. and Baumgart, M. and Stadler, G. and Saxinger, Martin and Kugi, A.},
booktitle = {Proceedings of the 8th Vienna International Conference on Mathematical Modelling (MATHMOD)},
title = {Dynamical Models of Axially Moving Rods with Tensile and Bending Stiffness},
doi = {10.1016/j.ifacol.2015.05.041},
pages = {598--603},
address = {Vienna, Austria},
month = {2},
year = {2015},
}
@InProceedings{Steinboeck15a,
author = {Steinboeck, A. and Kugi, A.},
booktitle = {Proceedings of the 4th IFAC Workshop on Mining, Mineral and Metal Processing (MMM)},
title = {Steering Control of Metal Strips Using a Pivoted Guide Roller},
doi = {10.1016/j.ifacol.2015.10.092},
number = {17},
pages = {137--142},
volume = {48},
address = {Oulu, Finland},
issn = {2405-8963},
month = {8},
year = {2015},
}
@InProceedings{Jadachowski14,
author = {Jadachowski, L. and Meurer, T. and Kugi, A.},
booktitle = {Proceedings of the 19th IFAC World Congress},
title = {Backstepping Observers for Periodic Quasi-Linear Parabolic {PDE}s},
doi = {10.3182/20140824-6-ZA-1003.01246},
pages = {7761--7766},
address = {Cape Town, South Africa},
month = {8},
year = {2014},
}
@InProceedings{Stadler2014,
author = {Stadler, Georg and Steinboeck, Andreas and Baumgart, M. and Kugi, A.},
booktitle = {Tagungsband GMA-Fachausschuss 1.30 "Modellbildung, Identifikation und Simulation in der Automatisierungstechnik"},
title = {{Bewegung eines Stahlbandes auf einer beweglichen St\"utzrolle}},
pages = {69--89},
address = {Anif/Salzburg, Austria},
month = {9},
year = {2014},
}
@Book{Saxinger2021,
author = {Saxinger, M.},
title = {Model-based control of the transverse strip shape and position in a hot-dip galvanizing line},
editor = {Kugi, A. and Schlacher, K. and Kemmetm\"uller, W.},
isbn = {978-3-8440-7847-3},
publisher = {Shaker Verlag},
series = {Modellierung und Regelung komplexer dynamischer Systeme},
volume = {51},
address = {D\"uren},
organization = {Institute f{\"u}r Automatisierungs- und Regelungstechnik (TU Wien) und Regelungstechnik und Prozessautomatisierung (JKU Linz)},
year = {2021},
}
@InCollection{Kugi2017,
author = {Kugi, Andreas},
booktitle = {Technologie im Gespr{\"a}ch 2017. Discussing Technology 2017},
title = {Roboter {\&} Co: Ein neues Zeitalter der industriellen Automatisierung},
isbn = {978-3-99050-115-3},
pages = {25--33},
publisher = {Amalthea Verlag},
address = {Wien},
year = {2017},
}
@Book{Prinz2017,
author = {Prinz, K.},
title = {Model-based control of the thickness profile in hot strip rolling},
editor = {A. Kugi and K. Schlacher},
isbn = {978-3-8440-5633-4},
publisher = {Shaker Verlag},
series = {Modellierung und Regelung komplexer dynamischer Systeme},
volume = {37},
address = {Aachen},
organization = {Institute f{\"u}r Automatisierungs- und Regelungstechnik (TU Wien) und Regelungstechnik und Prozessautomatisierung (JKU Linz)},
year = {2017},
}